The arduino based prototype of handsanitizer tool and automatic mask feeder Prototipe Alat Handsanitizer Dan Masker Feeder Otomatis Berbasis Arduino

Article Sidebar

PDF
Published May 31, 2021
DOI https://doi.org/10.25077/temapela.3.2.45-50.2020

Main Article Content

Syahrial Syahrial
Universitas Negeri Jakarta
Muhammad Fajrin S
Universitas Negeri Jakarta
Yusuf Syani
Universitas Negeri Jakarta

Abstract

The purpose of this research is to design and construct  a prototype of an Arduino-based automatic handsanitizer and mask feeder. The research method was carried out by laboratory experiments. The experimental stages consisted of designing hardware (hadware), software (software) and testing the whole tool. The test results showed that  ultrasonic sensor and dispencer can detect at a distance of 5 cm. The Arduino dc motor test that  given high and low logic for the direction of each clockwise and counter clockwise motor resulted in an output voltage of 5.09V. Overall the tool testing went well. Regarding to the results, it can be concluded that the tools can be on of the options to reduce the spread of COVID-19 in the Jakarta State University academic community, especially the laboratories within the Jakarta State University.


 


 

Downloads

Download data is not yet available.

Article Details

How to Cite
Syahrial, S., S, M., & Syani, Y. (2021). The arduino based prototype of handsanitizer tool and automatic mask feeder. Jurnal Temapela, 3(2), 45-50. https://doi.org/10.25077/temapela.3.2.45-50.2020
Issue
Vol 3 No 2 (2020): Jurnal Teknologi Dan Manajemen Pengelolaan Laboratorium (Temapela)
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

A. Diana (2012). Pengaruh Desiminasi Dokter Kecil Tentang Penggunaan Hand Sanitizer Gel dan Spray Terhadap Penurunan Angka Kuman Tangan Siswa SDN Demakijo Gamping Sleman. Skripsi. Poltekkes Kemenkes Yogyakarta.

Enggartiyasto, A., Suyanto, A., & Istiqomah, S. (2018). Pemanfaatan Perasan Daun Kemangi Sebagai Hand Sanitizer (Doctoral dissertation, Poltekkes Kemenkes Yogyakarta).

Djuandi, F. (2011). Pengenalan arduino. www. tobuku. 2011, p. 24.

Prasetyo, D. (2015). Perancangan Prototipe Alat Cuci Tangan Otomatis Dengan Sensor Ultrasonik HC-SR04 Berbasis Pengendali Mikro Arduino Uno R3. Jurnal informatika dan Industri CYBER-TECHN, 10. No.01.

Putsanra, D. Vahrun. (2020, Juni 9). Arti New Normal Indonesia: Tatanan Baru Beradaptasi dengan COVID-19. Retrieved from tirto.id: https://tirto.id/arti-new-normal-indonesia-tatanan-baru-beradaptasi-dengan-covid-19-fDB3
Rahmayanti, H., Syani, Y., & Oktaviani, V. (2019). Prototype Smart Trash Can for Implementation Smart Environment in the Smart City based on Arduino and Android. KnE Social Sciences, 618-624.

Nasution, A. A., Rusfandi, R., & Putra, R. (2018). Pembuatan Alat Monitoring Suhu Dan Daya Listrik Yang Dapat Di Baca Secara Online Pada Anechoic Chamber Di Laboratorium Antena Politeknik Negeri Padang. Jurnal TEMAPELA, 1(1), 1–6.https://doi.org/10.25077/temapela.1.1.1-6.2018

Abdurachman Effendi, M. Mas Ruri Yusuf. (2019). Pembuatan Dan Pengujian Perangkat Beban Tiruan Sebagai Alat Kategori Dua Pada Praktikum Sistem Tenaga. Jurnal TEMAPELA, 2(1), 1-10.

Surat Edaran Mendikbud No.3 tahun 2020 tentang pencegahan corona virus disease (Covid-19) pada satuan pendidikan.
https://www.kemdikbud.go.id/main/blog/2020/03/surat-edaran-pencegahan-covid19-pada-satuan-pendidikan, terbit 10 maret 2020